ABB REG670 - Signals

15.6.1.2 Signals
Table 508: AND Input signals
Name
Type Default Description
INPUT1 BOOLEAN 1 Input signal 1
INPUT2 BOOLEAN 1 Input signal 2
INPUT3 BOOLEAN 1 Input signal 3
INPUT4 BOOLEAN 1 Input signal 4
Table 509: AND Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
15.6.1.3 Technical data
Table 510: Number of AND instances
Logic block
Quantity with cycle time
3 ms 8 ms 100 ms
AND 60 60 160
15.6.2 Controllable gate function block GATE
The Controllable gate function block (GATE) is used for controlling if a signal should
be able to pass from the input to the output or not depending on a setting.
15.6.2.1 Function block
IEC04000410-2-en.vsd
GATE
INPUT OUT
IEC04000410 V2 EN
Figure 377: GATE function block
15.6.2.2 Signals
Table 511: GATE Input signals
Name
Type Default Description
INPUT BOOLEAN 0 Input to gate
1MRK502052-UEN B Section 15
Logic
811
Technical manual