ABB REG670 - Settings

If normal FTP is required to read out disturbance recordings, create a
specific account for this purpose with rights only to do File transfer.
The password of this user will be exposed in clear text on the wire.
20.3.3 Settings
Table 830: FTPACCS Non group settings (basic)
Name Values (Range) Unit Step Default Description
PortSelection None
Front
LANAB
LANCD
Any
-
- Any Port selection for communication
SSLMode FTP+FTPS
FTPS
- - FTPS Support for AUTH TLS/SSL
TCPPortFTP 1 - 65535 - 1 21 TCP port for FTP and FTP with Explicit
SSL
PasvPortStart 0 - 65515 - 1 49200 First TCP data port for PASV
PasvPortEnd 0 - 65535 - 1 49232 Last TCP data port for PASV
20.4 Authority status ATHSTAT
20.4.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Authority status ATHSTAT - -
20.4.2 Functionality
Authority status ATHSTAT function is an indication function block for user log-on
activity.
User denied attempt to log-on and user successful log-on are reported.
20.4.3 Function block
IEC06000503-2-en.vsd
ATHSTAT
USRBLKED
LOGGEDON
IEC06000503 V2 EN
Figure 497: ATHSTAT function block
Section 20 1MRK502052-UEN B
Basic IED functions
1096
Technical manual