ABB REG670 - Monitored Data

Name Values (Range) Unit Step Default Description
RefX2 -1000000.000 -
1000000.000
Ohm 0.001 2000.000 Reference reactance X2 in ohm
RefR3 0.001 -
1000000000.000
Ohm 0.001 1000.000 Reference resistance R3 in ohm
RefX3 -1000000.000 -
1000000.000
Ohm 0.001 2000.000 Reference reactance X3 in ohm
RefR4 0.001 -
1000000000.000
Ohm 0.001 1000.000 Reference resistance R4 in ohm
RefX4 -1000000.000 -
1000000.000
Ohm 0.001 2000.000 Reference reactance X4 in ohm
RefR5 0.001 -
1000000000.000
Ohm 0.001 1000.000 Reference resistance R5 in ohm
RefX5 -1000000.000 -
1000000.000
Ohm 0.001 2000.000 Reference reactance X5 in ohm
Table 141: STTIPHIZ Non group settings (advanced)
Name Values (Range) Unit Step Default Description
FilterLength 1 s
2 s
- - 1 s Length of filter buffer
7.9.8 Monitored data
Table 142: STTIPHIZ Monitored data
Name
Type Values (Range) Unit Description
RAVE REAL - Ohm Measured resistance to
earth in Ohm at inj freq
XAVE REAL - Ohm Measured reactance to
earth in Ohm at inj freq
FREQU REAL - Hz Measured frequency of
injected voltage into
stator
RFAULT
REAL - Ohm Estimated fault
resistance in Ohm
ZREF INTEGER - - Selected reference
impedance number
ZREFRE REAL - Ohm Used reference
impedance real part in
Ohm
ZREFIM
REAL - Ohm Used reference
impedance imaginary
part in Ohm
URMSSTAT
BOOLEAN - - RMS voltage status,
TRUE when > ULimRMS
Section 7 1MRK502052-UEN B
Impedance protection
298
Technical manual