ABB REG670 - Generic Communication Function for Double Point Indication DPGAPC

IPOS1 IPOS2 Name of displayed string Default string value
0 0 PosUndefined P00
1 0 Position1 P01
0 1 Position2 P10
1 1 PosBadState P11
14.7 Generic communication function for Double Point
indication DPGAPC
14.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Generic communication function for
Double Point indication
DPGAPC - -
14.7.2 Functionality
Generic communication function for Double Point indication DPGAPC function
block is used to send double indications to other systems, equipment or functions in
the substation through IEC 61850-8-1 or other communication protocols. It is
especially used in the interlocking station-wide logics.
14.7.3 Function block
IEC13000081 V1 EN
Figure 362: DPGAPC function block
14.7.4 Signals
Table 455: DPGAPC Input signals
Name
Type Default Description
OPEN BOOLEAN 0 Open indication
CLOSE BOOLEAN 0 Close indication
VALID BOOLEAN 0 Valid indication
Section 14 1MRK502052-UEN B
Control
768
Technical manual