ABB REG670 - Flush Mounting Dimensions

21.3.2 Flush mounting dimensions
C
A
B
E
D
IEC08000162-2-en.vsd
IEC08000162 V2 EN
Figure 549: Flush mounting
Case size
Tolerance
Cut-out dimensions (mm)
A
+/-1
B
+/-1
C D
6U, 1/2 x 19" 210.1 254.3 4.0-10.0 12.5
6U, 3/4 x 19" 322.4 254.3 4.0-10.0 12.5
6U, 1/1 x 19" 434.7 254.3 4.0-10.0 12.5
E = 188.6 mm without rear protection cover, 229.6 mm with rear protection cover
Section 21 1MRK502052-UEN B
IED hardware
1202
Technical manual