ABB REG670 - Type Tests According to Standards

Table 951: Degree of protection
Description Values
REX060
Front
Panel mounted, front
Rear, sides, top, bottom and connection terminals
IP40
IP54
IP20
REX061 and REX062
Top
Front, rear, sides and bottom
IP41
IP20
22.5.2 Type tests according to standards
Table 952: Electromagnetic compatibility tests
Test Type test values Reference standards
1 MHz burst disturbance 2.5 kV IEC 60255-26
100 kHz slow damped
oscillatory wave immunity
test
2.5 kV
IEC 61000-4-18, Class III
Surge withstand capability
test
2.5 kV, oscillatory
4.0 kV, fast transient
IEEE/ANSI C37.90.1
Electrostatic discharge
Direct application
Indirect application
15 kV air discharge
8 kV contact discharge
8 kV contact discharge
IEC 60255-26
IEC 61000-4-2, Class IV
Electrostatic discharge
Direct application
Indirect application
15 kV air discharge
8 kV contact discharge
8 kV contact discharge
IEEE/ANSI C37.90.3
Fast transient disturbance
test
4 kV IEC 60255-26, Zone A
Surge immunity test 1-2 kV, and 2-4 kV, 1.2/50 µs
High energy
IEC 60255-26, Zone A
Power frequency immunity
test
150-300 V, 50 Hz IEC 60255-26, Zone A
Power frequency magnetic
field test
1000 A/m, 3 s
100 A/m, cont.
IEC 61000-4-8
Radiated electromagnetic
field disturbance test
20 V/m, 80-1000 MHz
1.4-2.7 GHz
IEC 60255-26
Radiated electromagnetic
field disturbance test
20 V/m, 80-1000 MHz IEEE/ANSI C37.90.2
Conducted electromagnetic
field disturbance test
10 V, 0.15-80 MHz IEC 60255-26
Voltage dips and short
interruptions
Dips:
40% /200 ms
70% /500 ms
Interruptions:
0-50 ms: No restart
0… ∞ s: Correct behaviour at
power down
IEC 60255-26
Radiated emission 30-1000 MHz IEC 60255-26
Conducted emission 0.15-30 MHz IEC 60255-26
Section 22 1MRK502052-UEN B
Injection equipment hardware
1234
Technical manual