ABB REG670 - Product Information PRODINF

20.11 Product information PRODINF
20.11.1 Functionality
The Product identifiers function contains constant data (i.e. not possible to change)
that uniquely identifies the IED:
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
The settings are visible on the local HMI , under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/IED
identifiers
This information is very helpful when interacting with ABB product support (e.g.
during repair and maintenance).
20.11.2 Settings
The function does not have any parameters available in the local HMI or PCM600.
20.11.3 Factory defined settings
The factory defined settings are very useful for identifying a specific version and very
helpful in the case of maintenance, repair, interchanging IEDs between different
Substation Automation Systems and upgrading. The factory made settings can not be
changed by the customer. They can only be viewed. The settings are found in the local
HMI under Main menu/Diagnostics/IED status/Product identifiers
The following identifiers are available:
• IEDProdType
• Describes the type of the IED (like REL, REC or RET). Example: REL670
• ProductDef
• Describes the release number, from the production. Example: 1.2.2.0
• ProductVer
• Describes the product version. Example: 1.2.3
1
is the Major version of the manufactured product this means, new platform of the
product
1MRK502052-UEN B Section 20
Basic IED functions
1123
Technical manual