ABB REG670 - Page 939

Name Values (Range) Unit Step Default Description
UnderTrigLe40 0 - 200 % 1 50 Under trigger level for analog channel 40
in % of signal
OverTrigOp40 Off
On
- - Off Use over level trigger for analog channel
40 (on) or not (off)
OverTrigLe40 0 - 5000 % 1 200 Over trigger level for analog channel 40 in
% of signal
Table 685: B1RBDR Non group settings (basic)
Name Values (Range) Unit Step Default Description
TrigDR01 Off
On
- - Off Trigger operation On/Off
SetLED01 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 1
TrigDR02 Off
On
- - Off Trigger operation On/Off
SetLED02 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 2
TrigDR03 Off
On
- - Off Trigger operation On/Off
SetLED03 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 3
TrigDR04 Off
On
- - Off Trigger operation On/Off
SetLED04 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 4
TrigDR05 Off
On
- - Off Trigger operation On/Off
SetLED05 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 5
TrigDR06 Off
On
- - Off Trigger operation On/Off
SetLED06 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 6
TrigDR07 Off
On
- - Off Trigger operation On/Off
SetLED07 Off
Start
Trip
Start and Trip
-
- Off Set LED on HMI for binary channel 7
Table continues on next page
1MRK502052-UEN B Section 16
Monitoring
933
Technical manual