ABB REG670 - Page 943

Name Values (Range) Unit Step Default Description
IndicationMa07 Hide
Show
- - Show Indication mask for binary channel 7
TrigLevel08 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 8
IndicationMa08 Hide
Show
- - Show Indication mask for binary channel 8
TrigLevel09 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 9
IndicationMa09 Hide
Show
- - Show Indication mask for binary channel 9
TrigLevel10 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 10
IndicationMa10 Hide
Show
- - Show Indication mask for binary channel 10
TrigLevel11 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 11
IndicationMa11 Hide
Show
- - Show Indication mask for binary channel 11
TrigLevel12 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 12
IndicationMa12 Hide
Show
- - Show Indication mask for binary channel 12
TrigLevel13 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 13
IndicationMa13 Hide
Show
- - Show Indication mask for binary channel 13
TrigLevel14 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 14
IndicationMa14 Hide
Show
- - Show Indication mask for binary channel 14
TrigLevel15 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 15
IndicationMa15 Hide
Show
- - Show Indication mask for binary channel 15
TrigLevel16 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 16
IndicationMa16 Hide
Show
- - Show Indication mask for binary channel 16
1MRK502052-UEN B Section 16
Monitoring
937
Technical manual