ABB REG670 - Page 952

Table 690: B3RBDR Non group settings (advanced)
Name Values (Range) Unit Step Default Description
TrigLevel33 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 33
IndicationMa33 Hide
Show
- - Show Indication mask for binary channel 33
TrigLevel34 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 34
IndicationMa34 Hide
Show
- - Show Indication mask for binary channel 34
TrigLevel35 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 35
IndicationMa35 Hide
Show
- - Show Indication mask for binary channel 35
TrigLevel36 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 36
IndicationMa36 Hide
Show
- - Show Indication mask for binary channel 36
TrigLevel37 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 37
IndicationMa37 Hide
Show
- - Show Indication mask for binary channel 37
TrigLevel38 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 38
IndicationMa38 Hide
Show
- - Show Indication mask for binary channel 38
TrigLevel39 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 39
IndicationMa39 Hide
Show
- - Show Indication mask for binary channel 39
TrigLevel40 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 40
IndicationMa40 Hide
Show
- - Show Indication mask for binary channel 40
TrigLevel41 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 41
IndicationMa41 Hide
Show
- - Show Indication mask for binary channel 41
TrigLevel42 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 42
IndicationMa42 Hide
Show
- - Show Indication mask for binary channel 42
TrigLevel43 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 43
IndicationMa43 Hide
Show
- - Show Indication mask for binary channel 43
TrigLevel44 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 44
IndicationMa44 Hide
Show
- - Show Indication mask for binary channel 44
Table continues on next page
Section 16 1MRK502052-UEN B
Monitoring
946
Technical manual