ABB REG670 - Page 966

Table 696: B6RBDR Non group settings (advanced)
Name Values (Range) Unit Step Default Description
TrigLevel81 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 81
IndicationMa81 Hide
Show
- - Show Indication mask for binary channel 81
TrigLevel82 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 82
IndicationMa82 Hide
Show
- - Show Indication mask for binary channel 82
TrigLevel83 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 83
IndicationMa83 Hide
Show
- - Show Indication mask for binary channel 83
TrigLevel84 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 84
IndicationMa84 Hide
Show
- - Show Indication mask for binary channel 84
TrigLevel85 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 85
IndicationMa85 Hide
Show
- - Show Indication mask for binary channel 85
TrigLevel86 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 86
IndicationMa86 Hide
Show
- - Show Indication mask for binary channel 86
TrigLevel87 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 87
IndicationMa87 Hide
Show
- - Show Indication mask for binary channel 87
TrigLevel88 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 88
IndicationMa88 Hide
Show
- - Show Indication mask for binary channel 88
TrigLevel89 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 89
IndicationMa89 Hide
Show
- - Show Indication mask for binary channel 89
TrigLevel90 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 90
IndicationMa90 Hide
Show
- - Show Indication mask for binary channel 90
TrigLevel91 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 91
IndicationMa91 Hide
Show
- - Show Indication mask for binary channel 91
TrigLevel92 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 92
IndicationMa92 Hide
Show
- - Show Indication mask for binary channel 92
Table continues on next page
Section 16 1MRK502052-UEN B
Monitoring
960
Technical manual