Wall ClockWall Clock
Parent ClockParent Clock
Grandmaster ClockGrandmaster Clock
OffsetOffset
Shows the current offset from the master clock.
Mean path delayMean path delay
Shows the mean path delay, which is the time from master to slave back to
master again, divided by two.
Sync timeoutSync timeout
Shows the current status of Sync Message reception. The Lamp icon becomes
red if no Sync Message has been received within five times the Sync interval.
UTCUTC
Shows the current UTC time. Requires an external GPS receiver.
CurrentCurrent
Shows the current wall clock time.
UTC offsetUTC offset
Shows the offset between the wall clock time and the UTC time.
This is available when the GPS is used as reference.
IdentityIdentity
Shows the identity of a slave's parent clock.
Port numberPort number
Shows the port number of a slave's parent clock.
IdentityIdentity
Shows the identity of the grandmaster.
ClassClass
Shows the class of the grandmaster.
AccuracyAccuracy
Shows the accuracy of the grandmaster. The hexadecimal value of the accuracy
in the PTP packet data is displayed right-hand.
Variance ann/est.Variance ann/est.
Shows the offset variance of the grandmaster. Both the announced value and a
calculated estimate are shown (in s
2
).
Variance RawVariance Raw
Shows the offset variance of the grandmaster in hexadecimal.
Priority 1/2Priority 1/2
Shows priority 1 and 2 of the grandmaster.
Steps removedSteps removed
Shows the number of communication paths traversed between the local clock
and the grand master clock.
Time sourceTime source
To Next Page
Loading...
