PerformancePerformance
ParametersParameters
The Network Master's memory size (the file size of measurement results) is 64
Mbytes per one port. The result file size is less than 64 Mbytes because it is
compressed when saving to the file.
Estimate of test durationEstimate of test duration
Contains an estimation of the time (in days, hours, minutes and seconds)
before the whole memory will be filled out by the test. During an ongoing
measurement, the estimate will be recalculated periodically.
OTNOTN
Select the ITU-T Recommendation applying to the test.
G.8201G.8201 Error performance parameters and objectives for multi-operator
international paths within the Optical Transport Network (OTN)
M.2401 (M.2110)M.2401 (M.2110)
M.2401M.2401 Error performance limits and procedures for bringing-into-service and
maintenance of multi-operator international paths and sections within an
optical transport network
M.2110M.2110 Bringing into service international multi-operator paths, sections and
transmission systems
Time periodTime period
This parameter is displayed if
OTN
is set to M.2401(M.2110).
15 minutes15 minutes, 1 hour1 hour, 2 hours2 hours, 24 hours24 hours, 7 days7 days
AllocationAllocation
Touching the SetupSetup button launches the dialog box shown below.
The dialog box is used to set up various performance parameters.
TypeType
Select the performance type as either G.8201G.8201 or M.2401/M.2110M.2401/M.2110. The contents
of the dialog box depends on the selected performance type.
AllocationAllocation
Set the Allocation ratio of OTUk, ODUk or TCMi. These parameters are
displayed if
Type
is M.2401/M.2110.
Section Objective (SESR)Section Objective (SESR)
To Next Page
Loading...
