Error/Alarm detectionError/Alarm detection
MonitorMonitor
Pointer analyzePointer analyze
OH CaptureOH Capture
TransceiverTransceiver
Test Sequence :
No Test Sequence
Single Alternating
Regular + Double
Regular + Missing
Double Alternating
Movement :
Positive
Negative
Burst: 1 to 100
Jump :
NDF: Including NDF or Excluding NDF
Pointer Value: 0 to 782(AU-4/AU-3) or 764(TU-3) or 139(TU-12) or 103(TU-11)
Alarm detection
LOS, LOF, OOF, MS-AIS, MS-RDI,AU-AIS, AU-LOP, HP-PLM, HP-TIM, HP-RDI,
HP-UNEQ, TU-AIS, TU-LOP, TU-LOM, LP-PLM, LP-TIM, LP-RDI, LP-UNEQ,
TC-AIS, HP-TC-RDI, HP-TC-ODI, HP-TC-UNEQ, TC-TIM, TC-LTC, TC-AIS, TC-
RDI, TC-ODI, TC-UNEQ, LSS
Display : Second (Resolution : 1 second)
Error Detection
A1A2, B1, B2, MS-REI, B3, HP-REI, V5/B3, LP-REI, TC-IEC, TC-BIP-2, TC-REI,
TC-OEI, Pattern error, Pattern block error for G.826
Display : Count, Ratio
Signal level:
dBm (Excluding STM-1e)
dB (For STM-1e)
Deviation: ppm (Resolution: 1 ppm)
Bit rate: bit/s
Pointer value: AU-PTR, TU-PTR
Element : Negative, Positive
Graph : Pointer movement
Item
SOH: 64 Frames
POH: 64 Frames
Pathtrace: J0/J1/J2 (Displays in ASCII characters)
Timing
Single
Repeat : Update period 1s
Module Present
To Next Page
Loading...
