Anritsu MT8820A - Page 104

Section 4 Basic Operation
4-30
5. Determine the value by one of the following operations. Unit is set to the one
displayed on the popup window.
• Press the encoder
• Press
Enter
• Press
Set
6. Popup window is closed and entered value is displayed.
7. When the value entry starts with numeric keypad,
+/
−
or
BS
, the
value is displayed according to the entry keys (pressing
BS
deletes the
previous value). Operation for numeric value entry is described in the table
below.
Table 4-7-5-2 Operation for numeric value entry
Numeric value entry Operation
Numeric value entry Numeric keypad
Reverse the symbol
+/
−
Delete the value for the cursor
BS
Cancel the entry operation
Cancel
8. Determine the value by one of the following operations and finish the entry.
• Press encoder
• Press
Set
Determined with default unit
• Press
Enter
• Press the unit key → Determined with specified unit