Anritsu MT8820A - Prmrecall

Section 8 Remote Control Commands
8-44
PRMRECALL
Recall Parameter
Reading settings (file number specified)
Function
Reads the parameter file and reflects the settings at MT8820A.
Command
PRMRECALL fnumber
Query
None
Response
None
Parameters
fnumber File number
Range = 0 to 999
Description
This command can only read a file whose saved file name is in the format of “default
file name + file number”. The default file name varies depending on the
measurement software.
Sample programming
To read settings of parameter file number 10:
PRMRECALL 10
Related commands
PRMRECALLNAME : Reading the file of a specified file name