Section 8 Remote Control Commands
8-46
PRMSAVE
Save Parameter
Saving parameter settings (file number specified)
Function
Saves parameter settings as a file.
Command
PRMSAVE fnumber
Query
None
Response
None
Parameters
fnumber File number (optional)
When omitted, the file is saved with the smallest number of those unused.
Description
The file saved with this command is assigned a name in the format of “default file
name + file number.” The default file name varies depending on the measurement
software.
Sample programming
To save a file with parameter file number 12:
PRMSAVE 12
To Next Page
Loading...
