Section 6 Common Screen Functions
6-12
6.1.8 Setting the time
The time for the internal clock can be adjusted. The time is set and displayed on a
24-hour system.
Example:
To set the time to 12:15:00:
[Procedure]
1. Press
Config
to open the Configuration menu.
2. Press
F1
: System Config. to open the System Configuration screen.
3. Turn the encoder to move the cursor onto [Display - Time (Time: Minute: Sec-
ond)].
4. Press the encoder to open the popup window.
5. Press the numeric keypad to set the hour to 12.
6. Press the encoder to determine the hour, and then move the cursor to the minute
column.
7. Press the numeric keypad to set the minute to 15.
8. Press the encoder to determine the minute, and then move the cursor to the sec-
ond column.
9. Press the numeric keypad to set the second to 00.
10. 10. Press
Set
to end the setting.
Example of programming by remote control
TIME 12,15,00
Note:
Press
Set
to end the input while the cursor is on the year or month col-
umn.
To Next Page
Loading...
