Anritsu MT8820A - Saving Parameters

6.3 Saving Parameters
6-19
6.3 Saving Parameters
6.3.1 Parameter saving function
Parameter saving function can save the set value for measurement parameter as a
parameter file. Measurement parameters that can be saved are all the measurement
parameters for the activated measurement software (used for the phone under meas-
urement).
Saved parameter files can be recalled by the parameter recalling function. By re-
calling the parameter file, set value for the measurement parameter can be returned
the status when the file is saved.
By using parameter saving and recalling function, parameter setting operation can be
complete by only one recalling and no repetition is required for every measurement.
Preparing several parameter setting files eliminates the need for setting parameters
again and can increase the efficiency of operation and measurement.
6.3.2 Saving destination of a parameter file
Parameter file is saved in the directory of the memory card. Directory path for the
saving destination is specific for each measurement software.
Up to 1000 files can be saved onto one memory card. An attempt made to save 1
001 or more files causes an error
Note:
1. Check that the memory card is correctly inserted in the memory card slot
on the front panel before saving a parameter file.
2. Do not exit the memory card during the parameter saving. Doing so
may cause not only the interruption for saving but also destruction of
other files in the memory card.
3. Take a back-up data for a file saved in the memory card to other media.
Anritsu is not liable for the data loss of a memory card.
6.3.3 Parameter saving method
Parameter saving methods are described below.
(1) Quick saving
Saves the parameter in any screen. Only a file number to identify a file can be
specified.
(2) Saving on the Parameter Save screen
Saves on the Parameter Save screen. Any file name can be specified.