Anritsu MT8820A - Section 2 Setup

Section 2 Setup
2-1
This section explains names and functions of each parts, installation method of
MT8820A and connection procedures with external devices.
2.1 Part Names and Functions ........................................ 2-3
2.1.1 Exterior .......................................................... 2-3
2.1.2 Front panel .................................................... 2-4
2.1.3 Rear panel..................................................... 2-14
2.2 Installation.................................................................. 2-18
2.2.1 Transportation ............................................... 2-18
2.2.2 Installation ..................................................... 2-19
2.2.3 Piggyback installation.................................... 2-21
2.2.4 Installation on a rack ..................................... 2-21
2.3 Connection................................................................. 2-22
2.3.1 Connecting a power cable............................. 2-22
2.3.2 Checking the power voltage.......................... 2-22
2.3.3 Protective grounding ..................................... 2-23
2.3.4 Connecting to a phone .................................. 2-24
2.3.5 Connecting a GPIB cable.............................. 2-25
2.3.6 RS-232C port ................................................ 2-26
2.3.7 10 Base-T port............................................... 2-26
2.3.8 Reference signal input/output connector....... 2-27
2.3.9 Event trigger connector ................................. 2-27
2.3.10 The call processing port ................................ 2-28
2.3.11 Checking power to be input to connector...... 2-33
2.4 Memory Card ............................................................. 2-34
2.4.1 Precautions for use ....................................... 2-34
2.4.2 Inserting and removing the Memory card...... 2-34
2.4.3 Formatting a memory card ............................ 2-34