Anritsu MT8820A - Section 5 Using Common Functions

Section 5 Using Common Functions
5-1
This section explains the operation procedure of the common functions for the meas-
urement software such as initialization, measurement start and methods for sav-
ing/reading parameters. Refer to Section 6 for the common screen functions.
5.1 Initialization ................................................................ 5-3
5.2 Calibration.................................................................. 5-4
5.2.1 Calibrating the communication system band ... 5-4
5.2.2 Calibrating all input/output bands.................. 5-5
5.3 Starting a Measurement ............................................ 5-6
5.3.1 Measurement mode ...................................... 5-6
5.3.2 Starting a measurement in the Single
mode.............................................................. 5-6
5.3.3 Starting a measurement in the Continuous
mode.............................................................. 5-6
5.3.4 Starting a measurement in the Synchronous
single mode ................................................... 5-7
5.3.5 Stopping a measurement .............................. 5-7
5.4 Connecting a Call ...................................................... 5-8
5.4.1 Connecting a call........................................... 5-8
5.4.2 Ending a call.................................................. 5-9
5.5 Hard Copy.................................................................. 5-10
5.5.1 Media and format of the saving destination .. 5-10
5.5.2 Taking a hard copy........................................ 5-10
5.6 Functions Can be Set Only for the Remote Control.... 5-11
5.6.1 Setting the LCD power source ...................... 5-11
5.6.2 Setting an image operation ........................... 5-11
5.6.3 Outputting non-modulation CW signals......... 5-11
5.6.4 Setting a GPIB terminator ............................. 5-11
5.6.5 Setting a processing at an error occurrence... 5-12