4.10 Operating a View Window
4-39
4.10 Operating a View Window
Open the view window to display the measurement waveform. A view window can
be displayed for each tag in the measurement result window on the measurement
screen. For a tag that can display the view window, a view window mark as shown
in the figure below is displayed on the right of the tag.
Fig. 4-10-1 View window mark
4.10.1 Opening a view window
A view window is displayed in the measurement result window on the measurement
screen.
[Procedure]
1. Press
Screen
to open the measurement screen.
2. Press
Focus
to activate the measurement result window.
3. Activate the tag to which the view window to be displayed is assigned.
4. Press
View
to open the view window.
4.10.2 Closing a view window
To close a view window, display a view window desired to be closed and press
View
.
[Procedure]
1. When multiple view windows are open, press
Alt View
to switch the view
window and display the view window to be closed.
2. Close the view window by performing one of the following:
· Press
View
· Press
F7
: Close on the first page of the function menu
Note:
Operations in the view window differ depending on the view window. Refer
to the operation manual of the measurement software.
To Next Page
Loading...
