Anritsu MT8820A - Esr2

8.2 Command Specifications in Alphabetical Order
8-33
ESR2?
END Event Status Register Query
Reading end event status register
Function
Reads the end event status register. The event that occurred can be identified with
the read value.
Command
None
Query
ESR2?
Response
register
Parameters
register End event status register
Value = bit0 + bit1 + ... + bit7
When using W-CDMA or GSM measurement software
bit0 = 2
0
= 1 : Measurement/sweep complete
bit1 = 2
1
= 2 : Not used
bit2 = 2
2
= 4 : Reception measurement complete
bit3 = 2
3
= 8 : Transmission measurement complete
bit4 = 2
4
= 16 : Audio measurement complete
bit5 = 2
5
= 32 : Not used
bit6 = 2
6
= 64 : Not used
bit7 = 2
7
= 128 : Not used
When using CDMA2000 measurement software
bit0 = 2
0
= 1 : All measurements complete
bit1 = 2
1
= 2 : Access Probe Power measurement complete
bit2 = 2
2
= 4 : Reception measurement complete
bit3 = 2
3
= 8 : Transmission measurement complete (excepting Access
Probe Power)
bit4 = 2
4
= 16 : Not used
bit5 = 2
5
= 32 : Not used
bit6 = 2
6
= 64 : Not used
bit7 = 2
7
= 128 : Not used