8.2 Command Specifications in Alphabetical Order
8-41
MEASSTOP
Measure Stop
Stopping measurement
Function
Stops the measurement currently being performed.
Command
MEASSTOP
Query
None
Response
None
Description
Measurement started with the SWP command cannot be stopped until measurement
is completed, and thus this MEASSTOP command is not effective. To stop the
measurement halfway, measurement must have been started with the SNGLS or
CONTS command.
Sample programming
To stop measurement halfway:
SNGLS /* Starts measurement */
MEASSTOP /* Starts measurement */
To Next Page
Loading...
