Anritsu MT8820A - Recalling with a File Name Specified; Reloading Media Information

Section 6 Common Screen Functions
6-32.
6.4.7 Recalling with a file name specified
When the Parameter Save screen has been used to save a parameter settings with any
file name, the Parameter Recall screen is used to recall the file.
Example:
To recall the parameter setting file named “Example”:
[Procedure]
1. Press
Screen
to open the screen selection window.
2. Turn the encoder to move the cursor onto “Parameter Recall”.
3. Press the encoder to open the Parameter Recall screen. In the file list, the
saved setting files appear.
4. Turn the encoder to move the cursor onto the file name to be recalled.
5. Press the encoder to open the execution confirmation popup window.
6. Turn the encoder to move the cursor onto “OK”.
7. Press the encoder to recall the file.
Example of programming by remote control
PRMRECALLNAME "Example"
6.4.8 Reloading media information
To reload media information that is displayed in the file list, execute Reload Media
Information on the function menu.
[Procedure]
On the Parameter Recall screen, press
F6
: Reload Media Information.