Anritsu MT8820A - Storage and Transportation Precautions

9.4 Storage and Transportation
9-29
9.4 Storage and Transportation
9.4.1 Packing
When packing the MT8820A, use of the original packing materials at shipment. If
you use any other cushioning materials, perform the following steps:
[Procedures]
1. Wrap MT8820A in a plastic bag.
2. Prepare a corrugated cardboard box, wooden box or aluminum case large
enough to put the cushioning materials on each side of MT8820A.
3. Put the cushioning materials around MT8820A. Check that MT8820A is hori-
zontally positioned with no space to move inside the box.
4. Anchor the box with packing rope, adhesive tape, or belt, etc.
9.4.2 Precautions on storage and transportation
When storing or transporting the MT8820A, satisfy the following environmental
conditions:
{ Little vibration
{ Temperature: 0 to 30°C
{ Humidity: 40 to 80%
{ Little temperature/humidity changes throughout the day
Avoid storing or transporting the MT8820A in any of the following environmental
conditions:
× Where it is exposed to strong vibration
× Where it is exposed to direct sunlight
× Where it is exposed to dust
× Where the temperature falls out of the −20 to +60°C range
× Where the humidity is 90% or more
× Where condensation may occur due to high humidity
× Where it is exposed to active gases
× Where the components may be oxidized
Note:
Store the MT8820A after cleaning the dust, finger prints, stains and other ac-
cumulated dirt.