Anritsu MT8820A - Command Specifications (Alphabetical)

8.2 Command Specifications in Alphabetical Order
8-11
8.2 Command Specifications in Alphabetical Order
This section describes executable commands in all the measurement software
operating on MT8820A in alphabetical order. For the commands to execute the
functions of measurement software, refer to the separate operation manual of each
measurement software.
How to view the command list
EX............................................................Command name (header)
Example....................................................Command function name
Explains how to view the command specifications
...................................................Function outline
Function....................................................Command function
Command.................................................Programming command syntax
Query ........................................................Query syntax
Response .................................................Response syntax
Parameters ..............................................Parameter definition
Description ...............................................Command restriction item, etc
Sample programming .............................Example for command use
Related command...................................Introduction for related command