8.2 Command Specifications in Alphabetical Order
8-29
DISPL
Panel Display Power
Setting the power switch of the LCD panel
Function
Sets the power switch on the LCD panel to On/Off. Under full remote control,
setting the LCD panel power to Off enables power-saving operation.
Command
DISPL on_off
Query
DISPL?
Response
on_off
Parameters
on_off LCD panel power
ON : LCD panel power On (normal display)
OFF : LCD panel power Off
Initial value = ON
Description
This function is available only for remote control.
Sample programming
To set the LCD panel power to Off:
DISPL OFF
To Next Page
Loading...
