Section 8 Remote Control Commands
8-24
BEP
Beep Sound
Setting beep sound
Function
Sets whether or not to sound the beep when an error occurs or for other conditions.
Command
BEP on_off
Query
None
Response
None
Parameters
on_off Setting the beep sound.
ON : Sounds the beep.
OFF : Does not sound the beep.
1 : Sounds the beep.
0 : Does not sound the beep.
Initial value = ON
Description
The beep sound setting can be inquired using the ALARM? query.
Sample programming
To set not to sound the beep:
BEP 0
Related commands
ALARM : Same function as BEP (with query function).
To Next Page
Loading...
