Anritsu MT8820A - Opening the Parameter Recall Screen; Quick Recalling

Section 6 Common Screen Functions
6-28
6.4.4 Quick recalling
Quick recalling means that any screen other than the Parameter Recall screen is used
to recall a parameter setting file. The file can be saved by an easy operation without
opening the Parameter Recall screen. For quick recalling, file name is made up of
WCAPR and a file number. Only a file number that identifies each file can be
specified. It is therefore impossible to recall files saved with an optional name.
Example:
To recall the file of the file number 001
[Procedure]
1. Press
Recall
to display the entry area in the lower part of the screen. In
the entry area, a file number appears.
2. Press
1
on the numeric key pad to enter the file number.
3. Press the encoder to recall the file.
Example of programming by remote control
PRMRECALL 001
6.4.5 Opening the Parameter Recall screen
When the Parameter Save screen has been used to save a parameter settings with any
file name, the Parameter Recall screen is used to recall the file.
The procedures for opening the Parameter Recall screen are shown below.
[Procedure]
1. Press
Screen
to open the screen selection window.
2. Turn the encoder to move the cursor onto “Parameter Recall”.
3. Press the encoder to open the Parameter Recall screen.