5.2 Calibration
5-5
5.2.2 Calibrating all input/output bands
Full Calibration performs calibration on the RF input/output bands (30 to 2700 MHz)
for MT8820A.
Full Calibration is performed when the MT8820A is turned on.
The time for the last Full Calibration is displayed at “Full CAL Time” field on Sys-
tem Information screen.
[Procedure]
1. Press
Screen
to select desired measurement screen.
2. Press
Next
to switch function menu page and display the Full Calibration
menu.
Fig. 5-2-2-1 Full Calibration menu
3. Press
F6
: Full Calibration to perform calibration.
To Next Page
Loading...
