Anritsu MT8820A - Overwrite Saving; Updating Media Information

Section 6 Common Screen Functions
6-26
6.3.9 Overwrite saving
A setting file can be overwritten to an existing file. The overwrite saving methods
are as follows:
(1) Specify the number of the name of the file to be overwritten by quick saving,
and select “OK” from the overwrite saving confirmation popup window.
(2) Place the cursor to the name of the file to be overwritten on the Parameter Save
screen to execute saving, and select “OK” from the overwrite saving confirma-
tion popup window.
The procedure for saving the file by placing the cursor onto the file name to be over-
written on the Parameter Save screen for is shown below:
[Procedure]
1. Press
Screen
to open the Screen Select popup window.
2. Turn the encoder to move the cursor onto “Parameter Save”.
3. Press the encoder to open the Parameter Save screen. In the file list, the al-
ready saved setting files appear.
4. Turn the encoder to move the cursor onto the name of the file to be overwritten.
5. Press the encoder to open the overwrite confirmation popup window.
6. Turn the encoder to move the cursor onto “OK”.
7. Press the encoder to start saving.
6.3.10 Updating media information
“File List” on the Parameter Save list displays file list of saving destination for
parameter files. To update media information that is displayed in the file list on the
Parameter Save screen, execute Reload Media Information from the function menu.
[Procedure]
Press
F6
: Reload Media Information on the Parameter Save screen.