8.2 Command Specifications in Alphabetical Order
8-71
TRM
GPIB Terminator
Setting the GPIB terminator
Function
Sets the code to be added at the end of a message received via GPIB.
Command
TRM terminator
Query
TRM?
Response
terminator
Parameters
terminator GPIB terminator
0 LF
1 CR/LF
Initial value = 0
Description
This function is available only for remote control.
Sample programming
To set the GPIB terminator for Phone 1 to CR/LF:
TRM 1
To Next Page
Loading...
