Anritsu MT8820A - Jump to a Tag

4.8 Tag Operation
4-37
(3) Execute the tag selection menu in the function menu
Function menu marked with “TAG” is the tag selection menu. By executing the
function menu on which tag name to be activated is written, the tag is activated.
Example:
To activate the Occupied Bandwidth tag on the Fundamental Measurement
screen/measurement result window of the W-CDMA measurement software.
[Procedure]
1. Open Fundamental Measurement screen.
2. Press
Focus
to activate the measurement result window.
3. Press
F3
: Occupied Bandwidth.
4.8.3 Jump to a tag
By executing a function menu marked with “TAG,” parameters and display items
belonged to a tag can be displayed faster than displaying by scroll. The displayed
tag is activated.