8.2 Command Specifications in Alphabetical Order
8-23
ALARM
Beep Sound
Setting beep sound
Function
Sets whether or not to sound the beep when an error occurs or for other conditions.
Command
ALARM on_off
Query
ALARM?
Response
on_off
Parameters
on_off Sets the beep sound.
ON : Sounds the beep.
OFF : Does not sound the beep.
Initial value = ON
Sample programming
To set not to sound the beep:
ALARM OFF
Related Command
BEP : Same function as ALARM (no query function)
To Next Page
Loading...
