6.1 Setting Systems and Interfaces
6-11
6.1.7 Setting the date
The date can be adjusted. The date is set in order of year, month, and day, regard-
less of the display format.
Example:
To set the date to December 24, 2001:
[Procedure]
1. Press
Config
to open the Configuration menu
2. Press
F1
: System Config to open the System Configuration screen.
3. Turn the encoder to move the cursor onto “Date (Year/Month/Day)”
4. Press the encoder to open the popup window.
5. Press the numeric keypad to set the year to 2001.
6. Press the encoder to determine the year, and then move the cursor to the month
column.
7. Press the numeric keypad to set the month to 12.
8. Press the encoder to determine the month and then move the cursor to the day
column.
9. Press the numeric keypad to set the day to 24.
10. Press
Set
to end the setting.
Example of programming by remote control
DATE 2001,12,24
Note:
Press
Set
to end the input while the cursor is on the year or month col-
umn.
To Next Page
Loading...
