Section 8 Remote Control Commands
8-58
SCREEN
Drawing
Setting drawing operation
Function
Sets whether or not to perform drawing on the screen. In full-remote control mode,
setting SCREEN OFF improves the measurement throughput. If drawing is set to
Off, the screen displays “Screen Off.”.
Command
SCREEN on_off
Query
SCREEN?
Response
on_off
Parameters
on_off Drawing on screen
ON : Draw (normal display)
OFF : Does not draw (normal display)
Initial value = ON
Description
This command is available only for remote control.
Sample programming
To set drawing to Off:
SCREEN OFF
To Next Page
Loading...
