Anritsu MT8820A - Page 131

6.1 Setting Systems and Interfaces
6-5
(ii) Title
Sets a user-defined character string to be displayed in the upper-left
corner of the screen.
• Set value: Up to 25 characters
• Initial value: MT8820A
(iii) Date Format
Sets the date display format
• Set value: YYYY/MM/DD (Year/Month/Date)
MM/DD/YYYY (Month/Date/Year)
DD/MM/YYYY (Date/Month/Year)
• Initial value: YYYY/MM/DD
(iv) Date
Sets the date display format.
• Set value: 2001/01/01 to 2030/12/31
(v) Time
Sets the time in 24-hour system.
• Set value: 00:00:00 to 23:59:59
(c) Beep Sound
Sets whether or not to beep for an error, etc.
• Set value: On (beep), Off (does not beep)
• Initial value: On
(2) Phone-1 parameter (tag)
Sets the interface for Phone-1.
(a) RF Output
Sets the connector for output destination of RF signal.
• Set value: Main, AUX
• Initial value Main
(b) GPIB
(i) GPIB Address
Sets the GPIB interface address for remote control.
• Set value: 0 to 30
• Initial value 1