Anritsu MT8820A - Page 196

8-8 Section 8 Remote Control Commands
Table 8-1-7-2 System setting commands (cont.)
Function Command Query Response Remarks
Sound Buzzer BZR ----- -----
Main RFOUT MAIN RFOUT? MAINRF Output
AUX RFOUT AUX RFOUT? AUX
LF TRM 0 TRM? 0GP-IB - 1 Terminator
CR/LF TRM 1 TRM? 1
IP Address PSETIPADDR n1,n2,n3,n4 PSETIPADDR? n1,n2,n3,n4 n1,n2,n3,n4 = 0 to 255
Subnet Mask PSETSNM n1,n2,n3,n4 PSETSNM? n1,n2,n3,n4 n1,n2,n3,n4 = 0 to 255
10BaseT - 1
Default Gateway PSETDEFGTWY n1,n2,n3,n4 PSETDEFGTWY? n1,n2,n3,n4 n1,n2,n3,n4 = 0 to 255
8.1.8 System information query commands
The commands mainly for reading hardware and software system information of MT8820A are listed in the table below. The
commands are available on all screens.
Table 8-1-8-1 System information query commands
Function Command Query Response Remarks
Software Version ----- MCFV? obj version obj = 0 IPL or
1 Main Firmware or
2 Preboot or
3 Platform
Serial Number ----- SERIAL? serial_number
Power On Time ----- TMCNT? time Unit = min
Full CAL Time ----- FULLCAL_TM? year,month,day,hour,
min,sec
year = 2001 to 2030
month = 1 to 12
day = 1 to 31
hour = 0 to 23
min = 0 to 59
sec = 0 to 59