Anritsu MT8820A - Safety Symbols; Symbols Used in Manual; Safety Symbols Used on Equipment and in Manual

ii
To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the follow-
ing safety symbols to indicate safety-related information. Insure that you clearly understand the meanings of the
symbols BEFORE using the equipment.
Some or all of the following five symbols may not be used on all Anritsu equipment. In addition, there may be oth-
er labels attached to products which are not shown in the diagrams in this manual.
Symbols used in manual
This indicates a very dangerous procedure that could result in serious injury or
death if not performed properly.
This indicates a hazardous procedure that could result in serious injury or death if
not performed properly.
This indicates a hazardous procedure or danger that could result in light-to-severe
injury, or loss related to equipment malfunction, if proper precautions are not taken.
Safety Symbols Used on Equipment and in Manual
The following safety symbols are used inside or on the equipment near operation locations to provide information
about safety items and operation precautions. Insure that you clearly understand the meanings of the symbols
and take the necessary precautions BEFORE using the equipment.
This indicates a prohibited operation. The prohibited operation is indicated sym-
bolically in or near the barred circle.
This indicates an obligatory safety precaution. The obligatory operation is indicat-
ed symbolically in or near the circle.
This indicates a note. The contents are described in or near the triangle.
This indicates a note. The contents are described in the box.
These indicate that the marked part can be recycled.
MT8820A
Radio Communication Analyzer
Operation Manual
10 July 2001 (First Edition)
28 February 2003 (Fifth Edition)
Copyright © 2001-2003, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior written permission of the
publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
Safety Symbols
DANGER
WARNING
CAUTION