3.4 Viewing a screen
3-7
7. The phone currently being measured and measurement software
When Phone-1 is being measured, shows the measurement software being used.
The first connector, such as Main 1 or GPIB-1, is used.
8. Function menu
Functions to be executed by pressing the corresponding function key on the
right hand side.
9. Measurement indicator or error messages
Shows measurement progress/completion messages or error message when an
error occurs.
10. Transmission power monitor value for a phone
Shows transmission power monitor value for a phone.
11. Upper window
Display field for results of each measurement.
12. Lower window
Display field for the Parameter window for parameter settings and others.
13. Tag
A marker for major items such as parameter or measured result groups. A tag
becomes active when the cursor is put on a parameter or measured result.
14. Cursor
Used to select values to be set to parameters or scroll a window.
15. Scroll bar
Appears when all information cannot be displayed within the current
screen/window size. You can see all information by scrolling the
screen/window.
To Next Page
Loading...
