Applied Biosystems 7900HT User Manual

DRAFT
September 1, 2004 11:39 am, CH_Trouble.fm
Chapter 8 Troubleshooting
8-4 Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide
Taq M a n
®
Low Density
Array
After removing the Low Density Array from its
packaging, the fill consumable is damaged
(creased, bent, or folded).
8-18
After removing the Low Density Array from its
packaging, the aluminum foil backing is
damaged (creased, bent, or folded).
After removing the Low Density Array from its
packaging, dust or other particulates settle on
the reaction wells (optical side of the Low
Density Array).
After removing the Low Density Array from its
packaging, water condenses on the reaction
wells (optical side of the Low Density Array).
After pipetting, too little PCR reaction mixture
has gone into the fill reservoir.
After pipetting, some of the PCR reaction
mixture leaks out of the vent port in the fill
reservoir.
The PCR reaction mixture leaks during PCR
cycling.
After a mean assay result and standard
deviation of the replicates are calculated, a
specific replicate appears to be an outlier.
SDS Enterprise Database
Archive or restore operation was terminated
prematurely
8-20
Cannot Connect to the Database
Table 8-1 Troubleshooting Table
Category Symptom Page

Applied Biosystems 7900HT Specifications

General

Brand	Applied Biosystems
Model	7900HT
Category	Laboratory Equipment
Language	English