DRAFT
September 1, 2004 11:39 am, CH_Real-Time.fm
After the Analysis
Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide 6-35
After the Analysis
User Access
Requirement
If using the SDS Enterprise Database, you must belong to the Scientist or
Administrator User Group to save analyzed data from a relative quantification study.
Post-Analysis
Options
The following options are available after the analysis:
Changing the Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
Printing a Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
Exporting Plate Document Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
Saving the Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (see below)
Saving the
Analyzed Study
as a Multiple
Plate Document
After an analysis, the SDS software allows you to save the results as an SDS 7900HT
Multiple Plate Document (*.sdm).
To save the analysis to an SDS 7900HT Multiple Plate Document (*.sdm):
1. In the SDS software, select File > Save As.
2. In the Look in field of the Save As dialog box, navigate to and select a directory
for the software to receive the new file.
3. In the File name field, enter a file name for the file
4. Click . The software saves the plate document to the specified directory.
Saving the Study to the SDS Enterprise Database
The SDS Enterprise Database does not store relative quantification studies
(SDS 7900HT Multiple Plate Documents).