Preface
ARM DDI 0210C Copyright © 2001, 2004 ARM Limited. All rights reserved. xvii
Chapter 7 AC and DC Parameters
Read this chapter for a description of the AC and DC parameters, timing
diagrams, definitions, and operating data.
Appendix A Signal and Transistor Descriptions
Read this chapter for a description of the ARM7TDMI core signals.
Appendix B Debug in Depth
Read this chapter for further information on the debug interface and
EmbeddedICE-RT macrocell.
Appendix C Differences Between Rev 3a and Rev 4
Read this chapter for a description of the differences and enhancements
between Rev 3a and Rev 4 of the processor.
Glossary Read the glossary for a list of terms used in this manual.
Conventions
Conventions that this Thumb can use are described in:
• Typographical
• Timing diagrams on page xviii
• Signals on page xviii
• Numbering on page xix.
Typographical
The typographical conventions are:
italic Highlights important notes, introduces special terminology,
denotes internal cross-references, and citations.
bold Highlights interface elements, such as menu names. Denotes
signal names. Also used for terms in descriptive lists, where
appropriate.
monospace
Denotes text that you can enter at the keyboard, such as
commands, file and program names, and source code.
monospace
Denotes a permitted abbreviation for a command or option. You
can enter the underlined text instead of the full command or option
name.
To Next Page
Loading...
