Preface
xvi Copyright © 2001, 2004 ARM Limited. All rights reserved. ARM DDI 0210C
About this manual
This is the ARM for the ARM7TDMI r4p1 processor.
Product revision status
The rnpn identifier indicates the revision status of the product described in this ARM,
where:
rn Identifies the major revision of the product.
pn Identifies the minor revision or modification status of the product.
Intended audience
This manual has been written for experienced hardware and software engineers who are
working with the ARM7TDMI processor.
Using this manual
This manual is organized into the following chapters:
Chapter 1 Introduction
Read this chapter for an introduction to the architecture.
Chapter 2 Programmer’s Model
Read this chapter for a description of the 32-bit ARM and 16-bit Thumb
instruction sets.
Chapter 3 Memory Interface
Read this chapter for a description of nonsequential, sequential, internal,
and coprocessor register transfer memory cycles.
Chapter 4 Coprocessor Interface
Read this chapter for details of theimplementation of the specialized
additional instructions for use with coprocessors and a description of the
interface.
Chapter 5 Debug Interface
Read this chapter for a description of the ARM7TDMI core hardware
extensions for advanced debugging to make it simpler to develop
application software, operating systems, and hardware.
Chapter 6 Instruction Cycle Timings
Read this chapter for a description of the instruction cycle timings.
To Next Page
Loading...
Need help?
General
