Introduction
1-20 Copyright © 2001, 2004 ARM Limited. All rights reserved. ARM DDI 0210C
1.4.3 Thumb instruction summary
The Thumb instruction set formats are shown in Figure 1-6 on page 1-21.
See the ARM Architectural Reference Manual for more information about the ARM
instruction set formats.
GT Greater than Z clear, N=V (N and V set or N and V clear)
LE Less than, or equal Z set or N<>V (N set and V clear) or (N clear and V set)
AL Always Flag ignored
Table 1-6 Condition fields (continued)
Field type Suffix Description Condition
To Next Page
Loading...
