AutomationDirect CLICK Series User Manual

Step 6: Establish PC to PLC Communications, (cont’d)
NOTE: If using the USB to RS232 converter, and you are not
sure to which PC COM Port the USB port is assigned, click the
Detail... button next to the COM Port drop down list to identify
it. The screen to the right shows the Koyo USB-Serial Com
Port device assigned to COM3. Select it and click OK.
Proceed to page 1-24
CLICK PLC Hardware User Manual, 6th Edition, Rev. G – C0-USER-M
1–19
Chapter 1: Getting Started

AutomationDirect CLICK Series Specifications

General

Brand	AutomationDirect
Model	CLICK Series
Category	Controller
Language	English