Figure 4-49
Table 4-11
Parameter Description
User The default is admin.
Password The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
Enter a strong password according to the password strength bar
indication.
Confirm Password
Step 4 Set remote device password and email information.
If you want to use current device password and email information, the remote device
automatically uses NVR admin account information (login password and email). There
is no need to set password and email. Go to step 6.
1) Cancel
Using current device password
and
email info
.
The
Enter Password
interface is displayed. See Figure 4-50.
Copyright © NSS Sp. z o.o.
45 User‘s Manual
To Next Page
Loading...