Operation C 2
ekrPro Com
60
web guide controller EDV-No.: MD.191.01.05/1.6.x Chapter: C 2
with analog sensors Date: 23.11.2007 Page: 19/19
C 2.9 Unit remote control
via CAN bus
Devices in the controller family (ekrPro Com
60
, ekrPro Key
60
) can
be interconnected via a CAN-Bus to form a networked system.
The function "Unit Remote Control" enables control of the control
units present in the system to be undertaken from different origins
(e.g. from another ekrPro Com
60
control unit or from an ekrPro
Key
60
external keyboard).
Selection of the unit to be operated is made via the menu
“Remote Device".
The procedure for selecting a unit, that is to be remotely controlled,
is described in chapter B 3.7.7.
To Next Page
Loading...
Need help?
General
