Decommissioning A 4
ekrPro Com
60
web guide controller
EDV No.: MD.191.01.05/1.6.x Chapter: A 4
with analog sensors Date: 23.11.2007 Page: 1/1
A 4 Decommissioning
Decommissioning (scraping) the systems must be carried out in
together with the entire machine.
The necessary procedures must be prepared by the manufacturer
of the machine. You must take into consideration that the control
system is generally considered to be an electrical / electronic
device, which must be disposed of in accordance with the current
legal requirements.
You might also be able to return the system to BST International
GmbH, but the corresponding agreement must be made first.
To Next Page
Loading...
Need help?
General
